Ambientika advanced+

Complete set

Available, delivery time 3 - 7 days

€479.00

Prices incl. VAT plus Shipping

Single room heat recovery ventilation system

Product number: 4893273177373

With integrated sensor technology.

Included in the package

2pcs G3 filter
Minimal exterior hood
installation model
instructions manual

General characteristics

remote controller included
2pcs G3 filter included
equipped with humidity sensor
equipped with light sensor
possibility of various settings and programs
the device can be connected via cable to other 15 devices
could be installed also in the bath room
The electrical contacts of the two buttons (On /Off and Speed control) can also be wall mounted.
It is also possible to connect the product to the home automation network (Building automation)
ceramic heat exchanger with an efficiency of up to 93%
compact, versatile, and easy to use
made of high-quality resistant materials of aesthetic excellence
double separate filters for entering and outgoing air, easily removable and washable
no condensate discharge required
adjustable aspiration speed with a capacity of up to 60m3/h
length of up to 500mm
alternated extraction and introduction flow
electronically commutated motor (Brushless)
reduced power consumption
silent operation
the direct ejection devices are to be installed on the perimeter walls of the building and they have a duct with a length varying from 250 to 500mm
it is possible to duct the exhaust air with a tube of the same diameter to a distance of up to 3 meters. For ducting the exhaust air with the necessity of deviation, the maximum length of the duct (including a 90° bend) will be of 2.5 meters
simple ventilation system that does not require ducts
easily removable and washable filters and heat exchanger
usable for replacement of an existing ejector with minimal intervention
WEEE: DE48132126
Battery: DE53191374

More product information

Handling

On / Off button. The unit can be controlled with the remote control or optionally with the wall panel.

Placement

In the case of installing several units, the units should be mounted as far apart from each other as possible. This ventilates the entire living space, making the most effective effect of the ventilation system. One unit covers approx. 30m² of living space.

Construction

The product is constituted by a main operating unit with wall joint to be placed inside the room, a recessed tube containing the ceramic exchanger and filters, an external conveyor with wall joint.

Function

The regenerator can be installed in homes and, generaly, in domestic and public places. dhe product is provided with a heat exchanger of ceramic type that accumulates heat during the air extraction from the room, while during the release of air from the outside, the device transfers the heat stored in the exchanger, to the incoming air. dhe product must be installed at the wall. The tube inside of which the ceramic exchanger is positioned, is equipped for walls with a maximum of 400/500mm of thickness͖ the tube can be shortened to a minimum of 250mm.

Info Product

Parameter description

Measurement units

Values

Air flow at maximum speed

m3/h

Efficiency of the ceramic regenerator

Noise level at maximum speed (3m)

dB(A)

Noise level at minimum speed (3m)

dB(A)

Operating temperature

°C

-20°C +50°C

Absorbed power

⌀ 6,7

Filters included

N°

Filtering class EN 779

Power supply

V/Hz

230 Vac – 50 Hz

Protection

IP44

Soundproofing against external noise

dB(A)

Weighted standard sound level difference Dn,e,w (C;Ctr) = 43 (-2;-4) dB

Products in comparison