Description
The radon system is an active radon measuring device for short and long-term measurements in apartments, companies, holiday homes and much more. It already shows radon values after 10 minutes and is therefore an absolute pro when it comes to speed. Thanks to the large ionization chamber inside, it determines very precise values for your measurement. The individual decays from radon and its decay products are counted and added up over 10 minutes. This results in a radon concentration in Bq/m³. All data can be read out, saved and exported via Bluetooth using the app.
Specifications:
- Technology: Ionization Pulse Chamber
- Measuring range: 0 to 10000 Bq/m³
- Power supply: 5V power adapter (included)
- Dimensions: 100x100x150mm
- Deviation < 10%
- Store values for 1 year in device
- Bluetooth connection with iOS and Android devices
- WLAN connection in the 2.4GHz WLAN range
- Modern app available for free in the Appstore / Playstore
What our customers value most about the Radon system:
- App and instructions in German
- 3 year guarantee
- Readings after just 10 minutes
- Bluetooth can be switched off
- WiFi connection with direct cloud storage
- Wall mounting possible
- Attractive price
- WLAN connection in the 2.4GHz WLAN range
- Modern app available in Appstore / Playstore
You will receive this with the order:
- The easy-to-use radon system
- Manual with explanations about the app and the device
- Power adapter 5V
Troubleshooting to reduce radon levels and complete the radon system:
In order to reduce the radon levels, two SOLO+ fans should be installed per 30m² area and connected to the fan control. This communicates wirelessly with the radon measuring device and switches the SOLO+ fans on and off with a time delay if necessary. This also creates the effect of cross ventilation, which causes even faster extraction of radon.
The power supply must be routed to the SOLO+ fans via the fan controller. Dimension: 105x105mm. Up to 4 SOLO+ devices can be connected to one fan controller.
Click here for the radon measuring device with fan control.
Alternatively, the radon system can also be linked to the ventilation units via the dew point control. The humidity and radon levels are then monitored.
Products in comparison
Ambientika advanced+
479,00€
With integrated sensor technology.
- Automatic operation
- Unit supplied with remote control and wall mounting bracket
- Can be wired to up to 15 other devices
- Minimal noise emissions – high-tech fan positioned behind the heat exchanger
- Optional free cooling – direction selectable
Ambientika wireless+
529,00€
With integrated sensor technology.
- Automatic operation
- Unit supplied with remote control and wall mounting bracket
- Can be wirelessly connected to up to 15 other devices
- Minimal noise emissions – high-tech fan positioned behind the heat exchanger
- Safe and reliable radio frequency (with built-in transmitter/receiver)
- Optional free cooling – direction selectable
Ambientika solo+
359,00€
The SOLO model, suitable for single-room solutions, operates autonomously without requiring manual control. This model can be connected to the dew point control or radon measurement system. For living rooms, the other models with sensor technology are recommended, because these models can work more quietly due to the whisper-quiet night mode.
Tip: If the Solo+ units are coupled with the time delay module (accessory), the optimal effect of cross ventilation can be achieved.
- Includes a set of G3 filters
- Radio remote control with three speed levels included in the set
- Minimal noise emissions - high-tech fan positioned behind the heat exchanger
- Made with high-quality materials
- Automatic operation makes it ideal for rental properties
- Energy-efficient