Ambientika Exhaust fan Easy
Note
For bathrooms with a shower or bath from a room area of 8m² the ADVANCED B+ model is recommended.
This model is more suitable for dehumidification and is equipped with heat recovery.
Description
This is a two-stage exhaust air fan that enables intermittent or continuous ventilation of small rooms and WCs.
This fan achieves a flow rate of 60 m³/h at the second power level. Whereby on the second
stage only consumes 2.9 watts, which makes this fan particularly energy-efficient and quiet.
Product with humidity sensor and timer (switch-off delay).
L and N always connected to the board.
The product automatically turns on when the humidity sensor detects a value higher than the set trip threshold or when the contact between L and Ls is closed or.
When the humidity level returns below the set intervention threshold, the product stays on for the set time of the TIMER and then turns off.
When the contact between L and Ls is opened the product stays on for the set time of the TIMER and then turns off.
Properties
- Ambientika Cover design
- Including 500mm PP pipe and Ambientika outer hood (design identical to other models)
- Intermittent or continuous ventilation of WCs
- Stepless opening and closing of the cover
- Overrun switch adjustable from 3 to 25 minutes
- Can be connected to a standard interval timer
- Humidity sensor (setpoint from 40 to 90%)
- Two-stage energy-efficient ball bearing motor with minimal energy consumption, long service life
- Very quiet operation, sound-optimized fan wheel
- Air flow rate: 30 – 60 m³/h
- Power consumption: 2.6-2.9 W
- Sound pressure level: 18 – 25 dBA
- Diameter: 100 mm
- Operating ambient temperature: 45°C
- Protection class: IPX4 (standard EN 60529)
- Complies with the EN 60335-2-80 standard
Products in comparison
Ambientika advanced+
479,00€
With integrated sensor technology.
- Automatic operation
- Unit supplied with remote control and wall mounting bracket
- Can be wired to up to 15 other devices
- Minimal noise emissions – high-tech fan positioned behind the heat exchanger
- Optional free cooling – direction selectable
Ambientika wireless+
529,00€
With integrated sensor technology.
- Automatic operation
- Unit supplied with remote control and wall mounting bracket
- Can be wirelessly connected to up to 15 other devices
- Minimal noise emissions – high-tech fan positioned behind the heat exchanger
- Safe and reliable radio frequency (with built-in transmitter/receiver)
- Optional free cooling – direction selectable
Ambientika solo+
359,00€
The SOLO model, suitable for single-room solutions, operates autonomously without requiring manual control. This model can be connected to the dew point control or radon measurement system. For living rooms, the other models with sensor technology are recommended, because these models can work more quietly due to the whisper-quiet night mode.
Tip: If the Solo+ units are coupled with the time delay module (accessory), the optimal effect of cross ventilation can be achieved.
- Includes a set of G3 filters
- Radio remote control with three speed levels included in the set
- Minimal noise emissions - high-tech fan positioned behind the heat exchanger
- Made with high-quality materials
- Automatic operation makes it ideal for rental properties
- Energy-efficient