On / Off button + Speed control button. The electrical contacts of the two buttons (On /Off and Speed control) can also be wall mounted. This unit can also be connected with a timer.
In the case of installing several units, the units should be mounted as far apart from each other as possible. This ventilates the entire living space, making the most effective effect of the ventilation system. One unit covers approx. 30m² of living space.
The product is constituted by a main operating unit with wall joint to be placed inside the room, a recessed tube containing the ceramic exchanger and filters, an external conveyor with wall joint.
The regenerator can be installed in homes and, generaly, in domestic and public places. dhe product is provided with a heat exchanger of ceramic type that accumulates heat during the air extraction from the room, while during the release of air from the outside, the device transfers the heat stored in the exchanger, to the incoming air. dhe product must be installed at the wall. The tube inside of which the ceramic exchanger is positioned, is equipped for walls with a maximum of 400/500mm of thickness͖ the tube can be shortened to a minimum of 250mm.
Intake flow scheme
Discharge flow scheme
Air flow at maximum speed
m3/h
Efficiency of the ceramic regenerator
%
Noise level at maximum speed (3m)
dB(A)
Noise level at minimum speed (3m)
dB(A)
Operating temperature
°C
Absorbed power
W
Filters included
N°
Filtering class EN 779
-
Power supply
V/Hz
Protection
-
Soundproofing against external noise
dB(A)
479,00€
With integrated sensor technology.
529,00€
With integrated sensor technology.
359,00€
The SOLO model, suitable for single-room solutions, operates autonomously without requiring manual control. This model can be connected to the dew point control or radon measurement system. For living rooms, the other models with sensor technology are recommended, because these models can work more quietly due to the whisper-quiet night mode.
Tip: If the Solo+ units are coupled with the time delay module (accessory), the optimal effect of cross ventilation can be achieved.