Connecting the fan wirelessly as well.
The dew point control calculates when it would be better to switch the SOLO+ fan off and then cuts the power supply.
As standard, this is connected to the control device by a cable. It is now also possible to connect the fan wirelessly.
There is a radio receiver for this, which you can simply plug into a nearby plug socket. You therefore don’t need to lay a long cable to the control device.
You can control as many radio receivers as you want from one dew point control. Only one fan is generally connected to a radio receiver.
In the radio receiver, you can use an internal switch to set the SOLO+ fans to start with a time delay, in which case cross-ventilation is generated.
359,00€
The SOLO model, suitable for single-room solutions, operates autonomously without requiring manual control. This model can be connected to the dew point control or radon measurement system. For living rooms, the other models with sensor technology are recommended, because these models can work more quietly due to the whisper-quiet night mode.
Tip: If the Solo+ units are coupled with the time delay module (accessory), the optimal effect of cross ventilation can be achieved.
529,00€
With integrated sensor technology.
479,00€
With integrated sensor technology.